Testing
Pat Testing
LMC provide a PAT testing service. Pat testing or portable appliance testing is an important part of any health and safety policy. Maintaining PAT records has become a statutory requirement and is therefore considered good practice for any organisation. There are a number of reasons why appliances should be tested with the most important ones being: To comply with The Electricity at Work Regulations
To comply with the Provision and Use of Work Equipment Regulations
To minimise the risk of fire and injury caused by electrical appliances (Each year about 1000 accidents at work involving electric shock or burns are reported to the Health and Safety Executive. About 30 of these are fatal).
To satisfy your Insurance Company
To comply with all Health & Safety requirements
To comply with Quality Assurances
As part of your Fire Risk Assessment compliance
LMC Carry out PAT Testing for local authority’s, letting agents and blue chip companies across North Wales & Northern England.
Fixed Wire Inspection and Testing
An Electrical Condition Report (EICR) is an inspection on the condition of an electrical installation, to identify any deficiencies against the national safety standard for electrical installations.
Periodic inspection & testing examines and evaluates the electrical installation’s condition for safety, and/or deterioration due to a number of factors, such as damage, wear, tear, corrosion, excessive electrical loading, ageing and environmental influences, or items of none compliance which may give rise to danger. Periodic testing and inspection of fixed wiring & accessories assures a safe working environment for employees & building users and safe living environment for tenants within the rental market.
Why EICR’s Needed? As every electrical installation deteriorates with age and use, it is essential that they are maintained in order to ensure that the safety of others is not put at risk. Legalisation requires that all electrical installations are kept in a safe working condition.
A fixed electrical installation includes all parts of a distribution system from the main incoming supply point, through to wiring accessories such as sockets and light fittings – and everything in-between. Because the majority of this part of the installation is unseen, it is often forgotten in terms of test and inspection. The fact is that it is vitally important that all wires, cables, accessories and switching equipment are maintained well in order to ensure safety.
The process of an Electrical Safety Test, involves a similar process to that of PAT, in that a thorough visual inspection is carried out along with electronic tests. Engineers are looking to identify any potentially dangerous defects within the system that may lead to fire or injury. The benchmark for this inspection and test process is BS 7671 (The IEE Wiring Regulations) which provides guidance on how systems must be designed, installed and maintained. Deviations from this British Standard are most likely to be the cause of any problems.
After an initial visual inspection, several electronic tests are carried out by injected test voltages and current through the system to determine the integrity and functionality of cables, accessories and disconnection devices. This form of test and inspection is paramount to safety in the workplace.
LMC being registered as an Approved Electrical Contractor is unique, in that we offer our customers a remedial solution to repair any defects found during the test and inspection process. Our electrical installations division will prepare a no obligation quotation to repair any deviations from BS7671 and provide the required certification in each case.
We can provide Periodic Inspection Certificates, Minor Works Certificates and Electrical Installation Certificates. We are often being asked to provide an Electrical Certificates whom other people not in the electrical industry may refer to as Landlord Certificates, Part P Electrical Certificate or just an Electrical Safety Certificate. All of these we can provide.
LMC Currently carry out fixed wire testing of public buildings for local authority’s, University’s, blue chip companies, Letting Agents & the general public.
Emergency Lighting & Fire Alarm Testing
LMC provides an essential testing and certification service of Emergency Lighting Systems & Fire Alarm Systems. Whether you already have a testing and maintenance programme in place or are starting from scratch, we are able to help you fulfil your safety obligations by providing a reliable and cost effective testing service for both Emergency Lighting (inclusive of Central Battery Unit systems) and Fire Alarm Inspection & Testing.
Emergency Lighting Testing
Why does it need to be tested? Emergency lighting systems are installed to provide assistance in evacuating a building in the event of loss of the supply to the general lighting circuits through fire or a power cut for instance. The Fire Precautions (workplace) Regulations 1997 state that “Emergency routes and exits requiring illumination must be provided with emergency lighting of adequate intensity in case lighting fails”. It is the responsibility of all employers to ensure that these systems are suitably maintained and checked to ensure they are safe and compliant. All emergency lighting systems should now be installed, tested and inspected in accordance with BS5266-1.
What does it involve? Emergency Lighting Testing requires that every circuit supplying an emergency light is isolated to demonstrate that the internal batteries in the emergency fittings keep the exits and exit routes illuminated during power failure. Every 12 months a full discharge test (1hr or 3hr, dependent on system installed) must be performed by a competent person to ensure the batteries are capable of lasting for the required period. Each light is inspected to ensure it operates correctly and that the lamp inside is functional. Furthermore our Electrician will check that there are a sufficient number of lights and that the correct evacuation legends are fitted during the test visit to your premises. Upon completion of the test we will provide a report on any necessary repairs or improvements that may be required before issue of a Test Certificate.
LMC are currently rolling out emergency lighting renewal projects for existing clients, involving the upgrade of existing emergency light fittings with new and improved LED alternatives.
Fire Alarm & Fire Detection System Inspection & Testing
Why does it need to be tested? Fire alarm and fire detection systems are designed and installed as an early warning system to the inhabitants of buildings, that danger of fire is imminent. A system that is correctly designed, installed and maintained will ensure that all inhabitants have adequate time to evacuate a building and alert the fire authorities in good time. The Fire Precautions (workplace) Regulations 1997 requires that fire alarm and automatic detection systems should be installed where there is a requirement for early warning of fire. Periodic test and inspection of all fire alarm and detection systems is essential, to ensure they will operate correctly in the event of a fire; poor maintenance can lead to failure of these systems with catastrophic consequences. It is the responsibility of all employers to ensure that these systems are suitably maintained and checked to ensure they are safe and compliant. All fire alarm and detection systems should now be installed, tested and inspected in accordance with BS5839 pt 1.
What does it involve? Fire alarm and detection system test and inspection involves a series of visual checks being carried out on the components of the system to ensure their integrity, this will include cables, containment, panels, detectors and sounders. Whilst this type of work is completely non-evasive, it will also be necessary for our inspecting Electrician to carry out a fire alarm drill which involves triggering the alarm system via a detector or break-glass unit. Upon completion of the test and inspection a report of any remedial action, if applicable, will be provided before issue of a Test Certificate.
If you require further information on our testing services, please contact us today